New England Digital Emergency Communications Network
The STM32-DVM-MTR2K: DMR for MTR2000s

The STM32-DVM-MTR2K: DMR for MTR2000s

I’m one of probably a number of hams who have taken interest in the $475 UHF MTR2000s on eBay. They’re rated for 100% duty cycle at 40 Watts out, and, unlike the 100W models, cover the full 403-470 MHz band.

Unlike its much more expensive MTR3000, the MTR2000 is analog-only. As I pondered whether I could integrate an MMDVM setup with mine, I realized I was way behind the curve. A group of hams, including WA0EDA, N0MJS, and N3XCC pulled out all the stops, creating the STM32-DVM-MTR2K. It slides into the card slots on the MTR2000, and all the tuning can be done through the MTR2000 CPS.

At this time, it looks like they are (like most everything MMDVM-based) digital-only, though there are workarounds. A future version of the board is being discussed that could allow mixed-mode operation.

As discussed on the NEDECN mailing list, these won’t tie directly into the club’s c-Bridges, only with IPSC2. However, due to the steep costs of additional repeater entitlements for c-Bridges, interfacing a new repeater via IPSC2 may be preferred anyway.

I haven’t bought the card yet, nor put my repeater on the air, but both are mighty tempting!

2 Comments

  1. Jon, K1IMD

    I have had various mmdvm repeaters connected to c-Bridges for nearly 3 years using RPi’s and ZUM Radio mmdvms. I have also had MTR2000’s (3) first with an external mmdvm boards & RPis on c_Bridge networks for just shy of a year and 8 months with an v1.0 MTR2k board by N0MJS. They work great! The quality of the build and the tolerances in the MTR2000 makes it as close to plug and play as you can get. It will work right out of the box with NO test equipment. (Although tweaking with a service monitor to optimize the audio might help but not necessary) The tiny power sipping computer will run conventional CLI mmdvmhost or Pi-Star. The only down side is that those $475 ($510 delivered) MTR2000’s have become $100 more expensive. Makes a great setup with a real no nonsense 100% duty cycle repeater,

Leave a Reply to Cort Buffington, N0MJS Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.